PLAYING CARDS DESIGN

STEPS

1. We prepare the sketches for later vectorization.

2. For this project we will use textile ink, screen , stencil art adhesive, support, paper tape, cutter.

 3. We started cutting the arts to get a stencil.

 4. Stick the adhesive on the outside and place the mesh over the support (Make registration so that the mesh aligns with the support)

5. We deposit the ink inside the screen.

 6. We do not completely set the mesh on the stand, we pass with the squeegue on the screen  to load ink. (One uniform layer)

7. Now if we settle completely and re-pass the squeegue this time with a certain pressure and at an angle of 45 degrees. (We pass twice, it must be a uniform pressure)

 8. Carefully remove the screen to avoid staining somewhere unwanted and ready we will have the impression.